diff --git a/project.cfg b/project.cfg
new file mode 100644
index 0000000..dda78c5
--- /dev/null
+++ b/project.cfg
@@ -0,0 +1,115 @@
+## Main settings.. ##
+
+# Project name
+# @remark The name of the project is used as default name for the top module and the ucf file
+PROJECT = VGATimingGenerator
+
+# Target device
+# @example xc3s1200e-4-fg320 | xc5vlx50t-1-ff1136
+TARGET_PART = xc3s1200e-4-fg320
+
+# Path to the Xilinx ISE installation
+XILINX = /opt/Xilinx/14.7/ISE_DS/ISE
+
+# Optional the name of the top module (default is the project name)
+TOPLEVEL = VGATimingGenerator_test
+
+# Optional the path/name of the ucf file (default is the project name)
+CONSTRAINTS = src/VGATimingGenerator_test.ucf
+
+# Optional a target to copy the bit file to (make copy)
+# COPY_TARGET_DIR = 
+
+## ## ## ## ## ## ## ##
+# ---------------------
+
+## Source files settings.. ##
+# The source files to be compiled
+# @example `VSOURCE += src/main.v` (add a single Verilog file per line)
+# @example `VHDSOURCE += src/main.vhd` (add a single VHDL file per line)
+
+VHDSOURCE += src/VGATimingGenerator_pb.vhd
+VHDSOURCE += src/VGATimingGenerator_test.vhd
+VHDSOURCE += src/VGATimingGenerator.vhd
+
+## Test files settings.. ##
+# The testbench files to be compiled
+# @example `VTEST += tests/main_tb.v` (add a single Verilog testbench file per line)
+# @example `VHDTEST += tests/main_tb.vhd` (add a single VHDL testbench file per line)
+
+#VHDTEST += tests/VGATimingGenerator_tb.vhd
+VHDTEST += tests/VGATimingGenerator_test_tb.vhd
+
+## ## ## ## ## ## ## ##
+# ---------------------
+
+## ISE executable settings.. ##
+
+# General command line options to be passed to all ISE executables (default is `-intstyle xflow`)
+# COMMON_OPTS = 
+
+# Options for the XST synthesizer
+# @example -register_balancing (yes|no)
+# @example -opt_mode (speed|area)
+# @example -opt_level (1|2)
+XST_OPTS = 
+
+# Options for the NGDBuild tool
+# NGDBUILD_OPTS =
+
+# Options for the MAP tool
+# @example -mt 2 (multi-threading with 2 threads)
+# @example -cm speed (speed optimization)
+# @example -ol high
+# @example -detail
+# @example -timing
+MAP_OPTS =  -detail
+
+# Options for the PAR tool
+# @example -mt 2 (multi-threading with 2 threads)
+# @example -ol high
+PAR_OPTS = 
+
+# Options for the BitGen tool
+# @example -g Compress (compress bitstream)
+# @example -g StartupClk:Cclk (specify the startup clock to onboard clock)
+# @example -g StartupClk:JtagClk (specify the startup clock to JTAG clock)
+BITGEN_OPTS = -g StartupClk:JtagClk
+
+# Options for the Trace tool
+# TRACE_OPTS = 
+
+# Options for the Fuse tool
+# FUSE_OPTS = 
+
+# Options for the ISim simulator
+# @example -gui (start the simulator in GUI mode)
+# ISIM_OPTS =
+
+# Options for the ISim batch file
+# @example vcd dumpfile $@.vcd \n vcd dumpvars -m /UUT \n run 1 sec \n vcd dumpflush \n quit
+# ISIM_CMD = vcd dumpfile $@.vcd \n vcd dumpvars -m /UUT \n run 1 sec \n vcd dumpflush \n quit
+
+## ## ## ## ## ## ## ##
+# ---------------------
+
+## Programmer settings.. ##
+
+# The programmer to use
+# @example impact | digilent | xc3sprog
+# @remark impact is the default Xilinx programmer and you must create a impact.cmd file in the root directory..
+PROGRAMMER = 
+
+## Digilent JTAG cable settings
+
+# @remark Use the `djtgcfg enum` command to list all available devices
+# DJTG_DEVICE = DOnbUsb
+
+# The index of the JTAG device for the `prog` target
+# DJTG_INDEX = 0
+
+# The index of the flash device for the `flash` target
+# DJTG_FLASH_INDEX = 1
+
+## ## ## ## ## ## ## ##
+# ---------------------
\ No newline at end of file
diff --git a/vhdl_ls.toml b/vhdl_ls.toml
new file mode 100644
index 0000000..a7e2aab
--- /dev/null
+++ b/vhdl_ls.toml
@@ -0,0 +1,16 @@
+[libraries]
+defaultlib.files = [
+    'tests/*.vhd',
+    'src/*.vhd',
+    'src/*/*.vhd',
+]
+
+# Libraries can be marked as third-party to disable some analysis warnings, such as unused declarations
+UNISIM.files = [
+    '/opt/Xilinx/14.7/ISE_DS/ISE/vhdl/src/unisims/unisim_VCOMP.vhd',
+]
+UNISIM.is_third_party = true
+
+[lint]
+unused = 'error' # Upgrade the 'unused' diagnostic to the 'error' severity
+unnecessary_work_library = false # Disable linting for the 'library work;' statement
\ No newline at end of file